You are here  : Home Agenda List of Contributions
Preliminary List of Accepted Contributions

Presentations:



Invited Industrial Keynote Speaker
Title to be confirmed
J. Gunner
Koenigsegg, Sweden

Invited Academic Keynote Speaker
Title to be confirmed
Prof. E. G. Paterson
Virginia Polytechnic Institute and State University, USA

Invited Speaker
Title to be confirmed
Dr. R. Grover
General Motors, USA

Title to be confirmed
J. Papper
ICON, UK

Implementation and Stabilisation of the Adjoint Flow Model with Adjoint k-epsilon Turbulence and Adjoint Wall Functions in OpenFOAM®
H. Jasak*,**, N. Lisjak**
*Wikki Ltd, UK; **University of Zagreb, Croatia

Aerodynamic Simulation in the Development of a WRC Rally Car
H. Dechipre
Volkswagen Motorsport GmbH, Germany

Hybrid Multiphase Solver Based on OpenFOAM® for Bubble Column Reactor Design
M. Maekawa, Z. Zhang
Chiyoda Corporation, Japan

Producing Generic Advice on Indoor Dispersion Using Automated CFD Processing
T. Foat, S. Harrison, J. Nally, S. Parker, S. Parry
DSTL , UK

Retopologisation as an Answer to the Problem of Mesh Motion for Large Deformations
W. Wambold
Volkswagen AG, Germany

Numerical Aerodynamic Investigations of the DrivAer Car Model Using Open Source CFD Solver OpenFOAM®
G. Shinde, A. Joshi, K. Nikarn
Tata Consultancy Services, India

A Comparison of 2D and 3D Wigley Hull Simulations
M. Myers, O. Yapar
Vanderbilt University, USA

CFD Analysis of a Single MRL Tidal Turbine
M. Berry, G. Tabor
University of Exeter, UK

Building Block for Automatisation: PyFoam
B. Gschaider
ICE Strömungsforschung , Austria

Performance Improvement on the Algebraic Multigrid Solver in OpenFOAM®
H. Jasak
Wikki Ltd, UK; University of Zagreb, Croatia

Mesh Studies for External Aero Simulations in Automotive Applications
A. Iordanidis, V. Skaperdas
BETA CAE Systems S.A., Greece

A New Approach to Open CFD
C. Francke, Y. Li, K. Claramunt, C. Hirsch
NUMECA International , Belgium

GA Optimisation of CFD Models and Meshes
G. Tabor
University of Exeter , UK

Title to be confirmed
D. Nagy
BeyondCAE, USA

Analysis of the Power Losses in Geared Transmissions - Measurements and CFD Calculations Based on Open Source Codes
F. Concli, C. Gorla
Politecnico di Milano, Italy

Implementation of a Phase Field Method in OpenFOAM® for Simulation of Spreading Droplets and Verification by Test Problems
X. Cai, M. Wörner, O. Deutschmann
Karlsruhe Institute of Technology, Germany

Coupling DrNUM and OpenFOAM® for Efficient External Aerodynamics Simulations
O. Gloth
enGits GmbH, Germany

Advancing Turbulent Combustion Modeling Using the Eddy Dissipation Concept with Detailed Chemistry
D.A. Lysenko*, I.S. Ertesvåg*, K.E. Rian**
*Norwegian University of Science and Technology, Norway; **Computational Industry Technologies AS, Norway

Utilization of OpenFOAM® in the Reactive Production of Polymer Composite Materials
J. Nagy
Johannes Kepler University Linz, Austria

A Finite-Volume Solver for Two-Fluid Flow in Heterogeneous Porous Media Based on OpenFOAM®
O. Oxtoby, J. Heyns, R. Suliman
Council for Scientific and Industrial Research, South Africa

LBMHexMesh: an OpenFOAM® Based Grid Generator for Lattice Boltzmann Method (LBM)
A. Pasquali, M. Schoenherr, M. Geier, M. Krafczyk
Technische Universität Braunschweig, Germany

CFD Modeling of Low Rate Direct Contact Condensation Phenomena in Suppression Pool by Eulerian Two-Phase Flow Approach
G. Patel, V. Tanskanen, R. Kyrki-Rajamäki
Lappeenranta University of Technology, Finland

Charge Motion and Mixture Formation Analysis of a Direct Injection Spark Ignition Engine Using OpenFOAM®
K. G. Stapf
Ingenieurbüro TWB, Germany

Application-Driven Development of Open Source Simulation Technology: An Overview of DEM and CFD-DEM Models and their Applications
C. Goniva*,**, C. Kloss*,**, S. Pirker*
*Johannes Kepler University Linz, Austria; **DCS Computing GmbH, Austria

Analysis for Drift Control of Supplied Material in Blast Furnace Using DEM in OpenFOAM®
N. Kurata
IHI Corporation, Japan

Evaluating the Performance of a Rotary Vane Expander for Small Scale Organic Rankine Cycles using OpenFOAM®
A. Della Torre*, G. Montenegro*, M. Fiocco*, A. Onorati*, G. Schlager**, C.Benatzky**
*Politecnico di Milano, Italy; **Magna Powertrain, Austria

1-D Simulation of Transient Two-Phase Flow Phenomena in Hilly-Terrain Pipeline Systems
G. Reiss
ICE Strömungsforschung, Austria

DrNUM: A Framework for Dual Resolution Numerics on High Performance Hardware
R. Vilsmeier*, O. Gloth**
*numrax GmbH, Germany; **enGits GmbH, Germany

Vortex-Based Mixed Lagrangian-Eulerian Solver for Multi-Scale Fluid Dynamic Problem
N. Singh*, T. Ian**
*Imperial College London, UK; **University of Strathclyde, UK


Posters:

Application of Three-Dimensional Hydrothermal Model for the Temperature Dynamics at Small and Shallow Lakes
A. Abbasi, N. van de Giesen
Delft University of Technology, Netherlands

Grid Resolution and Time Step Studies in the Case of URANS Simulation of a Cyclone Separator
A.
Tampere University of Technology, Finland

Numerical Simulation of 2D and 3D Transitional Flows through Prismatic Turbine Cascade
J. Fürst
Czech Technical University in Prague, Czech Rebublic

HPC Realization of a Controlled Turbulent Round Jet Using OpenFOAM®
A. Onder, J. Meyers
KU Leuven, Belgium

BBiped an SU2-Based Open-Source: New Multiple Rotating Frame Developments
A. Ramezani, L. Remaki*, J. Antolin Suarez**
*BCAM-Basque center for Applied Mathematics, Spain; **BALTOGAR, Spain

Simulation of Turbulence around the Helicopter Deck of an Offshore Oil Platform
K. Giljarhus
Lloyd's Register Consulting, Norway


Further contributions to be confirmed shortly.
 

Registrations Cart


Your Cart is currently empty.



platinum

Platinum Sponsors



standard

Standard Sponsors



exhibitor_24y

Exhibitors



Partners

Login Form



Invited Speaker Koenigsegg
Invited Speaker Virginia Tech
Invited Speaker GM

Latest News




Follow us


Follow us on Twitter

Newsletter Signup